Color Testing
Color Testing at ARDL includes color measurement analysis of a material’s surface before and after exposure to ultraviolet light. This analysis can help determine the degree of degradation or discoloration. ARDL also provides color matching, as well as haze and luminous transmittance testing. Color matching tests are a quality control method intended to check the color of end use products against federal standard color chips. Haze and luminous transmittance testing uses a spectrophotometer to “measure the specific light-transmitting and wide-angle-light-scattering properties of planar sections of materials, specifically transparent plastics” according to ASTM.
Available Methods
Brightness Color Testing
Brightness and Color Testing
TAPPI 525/ISO R457Calculation of Color Tolerance and Color Differences
Standard Practice for Calculation of Color Tolerance and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244Calculation of Color Tolerance and Color Differences
Standard Practice for Calculation of Color Tolerance and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244CIE System Color Computing
Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM E 308CIE System Color Computing
Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM E 308Color Measurement of Fluorescent Specimens
Standard Practice for Color Measurement of Fluorescent Specimens
ASTM E 991Color Measurement of Fluorescent Specimens
Standard Practice for Color Measurement of Fluorescent Specimens
ASTM E 991Discoloration by UV Staining
Standard Test Method for Rubber Deterioration Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
ASTM D 1148Exterior Finishes, Textiles and Colored Trim Measurement
Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
SAE J 1545Exterior Finishes, Textiles and Colored Trim Measurement
Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
SAE J 1545Gray Scale For Color Change
Gray Scale for Color Change
AATCCGrey Scale for Assessing Change In Colour
Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assesing Change In Colour
ISO 105/A02Grey Scale for Assessing Change In Colour
Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assesing Change In Colour
ISO 105/A02Haze and Luminous Transmittance
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D 1003Haze and Luminous Transmittance
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D 1003Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim
SAE J1545Object-Color Evaluation
Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E 1164Object-Color Evaluation
Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E 1164Reflectance Factor & Color by Spectrophotometry Using Hemispherical Geometry
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E 1331Reflectance Factor and Color Testing
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E 1349Reflectance Factor and Color Testing
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E 1349Saybolt Color Change
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ASTM D 156Saybolt Color Change
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
ASTM D 156Standard Test Method for Specular Gloss
Comparison of the specular reflectance from the specimen to that from a black glass standard.
ASTM D523Yelowness and Whiteness Indices Instrument Measurement
Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E 313Yelowness and Whiteness Indices Instrument Measurement
Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E 313Yelowness Index of Plastics
Test Method for Yellowness Index of Plastics (Withdrawn, no replacement)
ASTM D 1925 (Withdrawn 1995)Yelowness Index of Plastics
Test Method for Yellowness Index of Plastics (Withdrawn, no replacement)
ASTM D 1925 (Withdrawn 1995)
